Weak brakes in need of a re-build? The All Balls Rear Caliper Rebuild Kit is here to help. This kit comes with everything you need to bring your rear caliper back into spec, even including the pins to replace your old grooved-out ones, as well as copper washers for when you remove your caliper from the brake line.
- Each kit contains all rubber parts necessary to rebuild one caliper.
- Kit includes: Boots, seals, bleeder cap, brake pad retaining pins, and copper washers (actual contents listed when available).
- Note: Kit contents will vary by fitment and are subject to change.
Caliper Rebuild Kit - Rear
Husaberg 390 FE 10-11, 450FE 06-11, 450FS-E 06-08, 450FX 10-11, 550FE 07-08, 570FE 09-11, 570FS 10-11, FE250 13-14, FE350 13-14, FE450 14, FE501 13-14, TE250 11-14, TE300 11-14,
Husqvarna FC 250 (EURO) 15, FC 250 14-22, FC 350 14-22, FC 450 (EURO) 15, FC 450 14-18, FC 450 Rockstar Edition 18, FE 250 14-17, FE 350 14-16, FE 350S 15-16, FE 450 14-16, FE 501 14-16, FE 501S 15-16, FS 450 18, TC 125 14-22, TC 250 14-22, TE 125 15-16, TE 250 14-17, TE 300 14-17, TX 300 17,
KTM EXC 125 06, EXC 200 04-05, EXC 250 00-05, EXC 300 04-05, EXC 450 03-11, EXC 500 12-16, EXC 500 Six Days 16, EXC 525 04-07, EXC 530 09-11, EXC-F 350 12-16, EXC-G 250 Racing 04-05, EXC-G 400 04-06, EXC-G 450 03-06, EXC-R 530 08, MXC 300 04-05, MXC-G 450 04-05, MXC-G 525 04-05, SMR 450 05-07, SMR 525 05, SMR 560 06-07, SX 125 03-18, SX 144 07-08, SX 150 09-18, SX 200 03-04, SX 250 03-18, SX 450 03-06, SX 525 04-06, SX-F 250 05-18, SX-F 250 Factory Edition 15, SX-F 350 11-18, SX-F 450 07-18, SX-F 450 Factory Edition 15-16, SX-F 505 08, SXS 125 04, SXS 250 03-04, SXS 450 03-04, SXS 540 03-06, XC 150 10-14, XC 200 06-09, XC 250 06-18, XC 300 06-18, XC 450 04-07, XC 525 06-07, XC-F 250 07-18, XC-F 350 11-18, XC-F 450 08-18, XC-F 505 08-09, XC-FW 250 06-16, XC-FW 350 12-16, XC-FW 350 Six Days 15-16, XCR-W 530 08, XC-W 200 06-16, XC-W 250 06-16, XC-W 300 06-16, XC-W 300 Six Days 15-16, XC-W 400 07-10, XC-W 450 07-16, XC-W 500 12-16, XC-W 525 07, XC-W 530 09-11
Kit Contents
| DESCRIPTION |
QTY PER KIT |
| Washer |
2 |
| Cup Seal, Master Cylinder |
1 |
| Cup Seal, Master Cylinder |
1 |
| Boot |
1 |
| Boot |
1 |
| Boot |
1 |
| Bolt Kit |
1 |
| Snap Ring |
2 |
